Heads Archives | Bomford Turner

Heads

Most heads offer a choice of flails and ability to adjust rotor speed to suit verge or hedge.

Hydraulic Roller

Hydraulic Rollers enable the operator to raise the roller to a higher position, remotely from inside the cab when cutting hedge.

Available on Pro-Trim and Pro-Cut

Double Helix Shaft

Double helix shaft technology (a Bomford innovation) delivers up to 45% overlap of the flails, belt driven protection against unseen debris and close-in cutting.

Available on Pro-Trim and Pro-Cut

Variable Track Brackets

The new VTB has been designed for operators who need to work in restrictive areas such as narrow lanes – perfect for getting up close and personal to hedges on rural roads and country estates.

ISMP

The ISMP head enables the whole shaft assembly to be changed saving considerable down time when different flails are required for different jobs. Pro-Trim, Pro-Cut and ISMP heads are equipped with ‘Anti Wrap’ bearings to reduce the risk of debris fouling the all important rotor bearings.

Belt vs Direct Drive

The belt housing on belt driven heads is typically 75mm narrower than the end drive motors enabling the head to get closer in to the hedge or fence. Belt drives offer shock protection when the rotor hits an obstacle where direct shaft driven end drive can sheer, resulting in expensive repairs and prolonged down time.

Our Heads Range

Most heads offer a choice of flails and ability to adjust rotor speed to suit verge or hedge.

800 Wren Head

The 800 Wren head is light weight. Direct driven from an end drive motor reducing the overall weight as there is no need for belts and pulleys.

View details

1000 Robin Head

The 1000 Robin head is light weight. Direct driven from an end drive motor reducing the overall weight as there is no need for belts and pulleys.

View details

950 LW

The 950 LW head is lighter weight for smaller machines. Direct driven from an end drive motor reducing the overall weight as there is no need for belts and pulleys.

View details

1107 MW

The 1107 MW heads are of medium weight but with all the advantages that belt drive gives, close-in cutting and damage limitation from unseen obstacles.

View details

1257 LW

The 1257 LW head is lighter weight for smaller machines. Direct driven from an end drive motor reducing the overall weight as there is no need for belts and pulleys.

View details