Osprey

The Osprey is the perfect choice for the small scale and co-operative agricultural markets. This economic entry level machine would also be of interest to sports and amenity managers.

With a choice of 4.5m or 5.0m reach, with an impressive 110 degrees of power slew and hydraulic breakout as standard, the Osprey is ideal where access is a challenge to the operator. The mainframe of the machine is close coupled to the tractor and this allows the machine to be fitted to smaller tractors than most other competitor models on the market.

Arm attachments can include a choice of flail heads for control of grass, hedges and light brush along with the Sheartrim cutter bar or Pro-Saw attachments for control of heavier brush.

Key Features:

  • 4.5 - 5.0m reach options
  • Choice of heads
  • Low friction cable,LPH or ESC controls
  • Three point linkage mounted
  • 110° power slew
  • Hydraulic breakout protection

Product Specifications

Standard = Standard   Optional = Optional   Not Available = Not Available

Specification4.5m (14'9")5.0m (16'5")

Tractor Requirements

Minimum horse poser  70hp  75hp
Minimum weight  2300kg/ 5070Lbs  2500kg / 5512Lbs

Base Unit mounting options  

Front mount Not available Not available
Mid-mount Not available Not available
Rear mount Standard Standard
Three point linkage (CAT II) Standard Standard
Axle bracket Not available Not available

Overall machine perameters  

Machine weight with head and oil  820kg / 1808Lbs  860kg / 1896Lbs
Capacity of oil tank  130L / 28.6USG  130L / 28.6 USG
Weight of machine with oil but without head  700kg / 1543Lbs  740kg / 1632Lbs

Controls

Cable Control (CC) Standard Standard
Low Pressure Hydraulic (LPH) Optional Optional
Electronic Switch Control (ESC) Optional Optional
Electronic Proportional Control (EPP) Not Available Not available
Intelligent Control System (ICS) Not available Not available
Cable rotor reverse Standard Standard
Electronic rotor reverse Not available Not available

Hydraulic System  

System capability 45hp 45hp
Pump flow rate 74L / 16.3USG 74L / 16.3USG
Pump type (Gear / Piston / Helical)  Gear Gear
Pump arrangment (Twin/Tandem Inline)  Twin Twin
Independant hydraulics   Standard Standard
Oil cooler   Optional Optional

Main features  

Fixed forward arm Not available Not available
Folding forward arm Not available Not available
Variable folding arm Not available Not available
Telescopic arm Not available Not available
Telescopic arm stroke Not available Not available
Power slew Standard Standard
Power slew angle  110° 110°
Gravity breakout protection Not available Not available
Hydraulic breakout protection Standard Standard
Arm float - manual operation Optional Optional
Arm float - electronic operation Optional Optional
Head angle float Standard Standard
Left hand cutting Optional Optional
Right hand cutting Optional Optional
Left and right hand cutting Not available Not available

Arm attachments - compatability

Variable track bracket (VTB) Not available Not available
Sheartrim cutter bar Optional Optional
Pro-Saw Optional Optional
Ditch cleaner Not available Not available
Rotary head Not available Not available

Accessories  

Road lights Not available Not available
Debris blower Not available Not available
Warning arrow - Magnetic Optional Optional
Cab guard kit Standard Standard

Cutting heads  

950mm head 102mm roller Standard Standard
1000mm head 102mm roller Optional Optional
1257mm head 102mm roller Optional Optional
1257mm head 150mm roller Optional Optional
1107mm head 115mm roller Optional Optional
1.5m sheartrim cutterbar Optional Optional

Flails

See the table below to see which flail heads are available for the different cutting heads listed above.

 BBMP44HS60Pro FlailT40T60True CutBushmaster
905mm Head with 102mm Roller Not Available Not Available Standard Not Available Not Available Not Available Optional Not Available
1000mm Head with 102mm Roller
Not Available Not Available Standard Not Available Not Available Not Available Optional Not Available
1257mm head 102mm roller Not Available Standard Standard Not Available Not Available Not Available Not Available Not Available
1257mm head 150mm roller Not Available Not Available Standard Not Available Not Available Not Available Not Available Not Available
1107mm head 115mm roller Not Available Not Available Standard Not Available Not Available Not Available Optional Not Available

Fittings & Add-ons

There are a number of fittings and add-ons available for this model. Click on the links below to find out more about the specific items available.

Working Reach dimensions

Head used for calcs: 950mm

 4.5m (14'9")5.0m (16'5")

A

4.55m 14'11" 5.0m 16'5"

B

4.33m 14'2" 4.8m 15'9"

C

2.3m 7'6" 2.8m 9'6"

D

3.7m 12'1" 4.2m 13'9"

E

4.7m 15'5" 5.2m 17"

X

1.00m 3'4"  1.00m 3'4"

Y

1.34m 4'7"  1.34m 4'7"